Comments for LiveAverage http://liveaverage.com I can't afford to live any other way. Tue, 24 May 2011 08:10:04 +0000 hourly 1 http://wordpress.org/?v=3.3.1 Comment on How-to: GSX650F & Vortex 41mm Clip-ons by Mick http://liveaverage.com/features/living/how-to-gsx650f-vortex-41mm-clip-ons/comment-page-1/#comment-196 Mick Tue, 24 May 2011 08:10:04 +0000 http://liveaverage.com/?p=84#comment-196 Based on your testimonial, definately worth a try! Thanks mate Based on your testimonial, definately worth a try! Thanks mate

]]> Comment on How-to: GSX650F & Vortex 41mm Clip-ons by JR http://liveaverage.com/features/living/how-to-gsx650f-vortex-41mm-clip-ons/comment-page-1/#comment-195 JR Mon, 23 May 2011 12:44:05 +0000 http://liveaverage.com/?p=84#comment-195 Never experienced any shaking at all -- and I hit some high speeds in mountainous (curved) road conditions (primarily in north Georgia near Helen). The handling was different; there's no doubt about a change in position and handling. You can always raise your front-end back to stock height. Take pictures and mark your existing triple tree position before making any changes, try it out, then change it back if you're unsatisfied with the results. It's not a terribly complicated process, or difficult to do... If raising it back to stock height, it would be WAY easier with two people. Never experienced any shaking at all — and I hit some high speeds in mountainous (curved) road conditions (primarily in north Georgia near Helen). The handling was different; there’s no doubt about a change in position and handling. You can always raise your front-end back to stock height. Take pictures and mark your existing triple tree position before making any changes, try it out, then change it back if you’re unsatisfied with the results. It’s not a terribly complicated process, or difficult to do… If raising it back to stock height, it would be WAY easier with two people.

]]> Comment on How-to: GSX650F & Vortex 41mm Clip-ons by Mick http://liveaverage.com/features/living/how-to-gsx650f-vortex-41mm-clip-ons/comment-page-1/#comment-194 Mick Mon, 23 May 2011 08:29:42 +0000 http://liveaverage.com/?p=84#comment-194 G'day mate, just a question on the finished result... After lowering the front end by all but an inch, how did you find the bike handled? I.e, my worry would be that it would develop some shakes at high speeds etc. The reason i ask is because i like to ride in the mountains etc, and the last thing i want is shakes and instability going through corners up there. Was just after a follow up report on how you've found the bike after the modifications? G’day mate, just a question on the finished result… After lowering the front end by all but an inch, how did you find the bike handled? I.e, my worry would be that it would develop some shakes at high speeds etc. The reason i ask is because i like to ride in the mountains etc, and the last thing i want is shakes and instability going through corners up there. Was just after a follow up report on how you’ve found the bike after the modifications?

]]> Comment on How to: GSX650F LED Tail Light Upgrade by Chris http://liveaverage.com/news/how-to-gsx650f-led-tail-light-upgrade/comment-page-1/#comment-187 Chris Sun, 03 Apr 2011 19:09:20 +0000 http://liveaverage.com/news/how-to-gsx650f-led-tail-light-upgrade/#comment-187 Given that the rear mudflap is pretty much integrated with the entire rear of the bike where did you decide to cut it? I'm planning to hack mine off and I am iffy on where to start cutting. Given that the rear mudflap is pretty much integrated with the entire rear of the bike where did you decide to cut it? I’m planning to hack mine off and I am iffy on where to start cutting.

]]> Comment on Ripping Play.FM Streams with Firefox and FlashGot by daweed http://liveaverage.com/news/ripping-play-fm-streams-with-firefox-and-flashgot/comment-page-1/#comment-77 daweed Sun, 26 Sep 2010 16:12:48 +0000 http://liveaverage.com/?p=286#comment-77 Perfect, was also searching for a year, your a god! Perfect, was also searching for a year, your a god!

]]> Comment on Ripping Play.FM Streams with Firefox and FlashGot by JR http://liveaverage.com/news/ripping-play-fm-streams-with-firefox-and-flashgot/comment-page-1/#comment-76 JR Fri, 20 Aug 2010 14:24:20 +0000 http://liveaverage.com/?p=286#comment-76 Good to know it helped someone else! I love the Play.FM selections and needed a way to take it on portable/offline devices... Good to know it helped someone else! I love the Play.FM selections and needed a way to take it on portable/offline devices…

]]> Comment on Ripping Play.FM Streams with Firefox and FlashGot by Poster http://liveaverage.com/news/ripping-play-fm-streams-with-firefox-and-flashgot/comment-page-1/#comment-75 Poster Fri, 20 Aug 2010 13:04:02 +0000 http://liveaverage.com/?p=286#comment-75 works great. thanks for the tip ... have been (casually) looking for this since a year. thanks!!! :-) works great. thanks for the tip … have been (casually) looking for this since a year. thanks!!! :-)

]]> Comment on How to: GSX650F LED Tail Light Upgrade by JR http://liveaverage.com/news/how-to-gsx650f-led-tail-light-upgrade/comment-page-1/#comment-70 JR Tue, 22 Jun 2010 14:01:45 +0000 http://liveaverage.com/news/how-to-gsx650f-led-tail-light-upgrade/#comment-70 You should be able to get them almost anywhere: Home Depot, Lowes, Ace Hardware, or any local hardware/electric supply store... There are also online suppliers: http://www.rapidonline.com/productinfo.aspx?&tier1=Cables+%26+Connectors&tier2=Connectors+-+Single+Pole&tier3=Splices&tier4=Tap%2c+blade+and+fuse+splices&moduleno=63979&catRef=33-0190&utm_source=AffWin&utm_medium=Affiliate&awc=1799_1277215070_368fd1efc13553863a9d88dab6f5b87b BUT you can use almost anything to splice your cables: wire nuts, butt splice crimp connectors, etc. You could just twist them together and cover them with electrical tape (not recommended) -- anything to make a connection. Just make sure you end up with clean, solid connections and a presentable splice solution :) You should be able to get them almost anywhere: Home Depot, Lowes, Ace Hardware, or any local hardware/electric supply store… There are also online suppliers: http://www.rapidonline.com/productinfo.aspx?&tier1=Cables+%26+Connectors&tier2=Connectors+-+Single+Pole&tier3=Splices&tier4=Tap%2c+blade+and+fuse+splices&moduleno=63979&catRef=33-0190&utm_source=AffWin&utm_medium=Affiliate&awc=1799_1277215070_368fd1efc13553863a9d88dab6f5b87b

BUT you can use almost anything to splice your cables: wire nuts, butt splice crimp connectors, etc. You could just twist them together and cover them with electrical tape (not recommended) — anything to make a connection. Just make sure you end up with clean, solid connections and a presentable splice solution :)

]]> Comment on How to: GSX650F LED Tail Light Upgrade by Trent http://liveaverage.com/news/how-to-gsx650f-led-tail-light-upgrade/comment-page-1/#comment-69 Trent Tue, 22 Jun 2010 12:42:57 +0000 http://liveaverage.com/news/how-to-gsx650f-led-tail-light-upgrade/#comment-69 where can i get a splice blade connector where can i get a splice blade connector

]]> Comment on How-to: GSX650F & Vortex 41mm Clip-ons by JR http://liveaverage.com/features/living/how-to-gsx650f-vortex-41mm-clip-ons/comment-page-1/#comment-67 JR Fri, 21 May 2010 12:00:16 +0000 http://liveaverage.com/?p=84#comment-67 Thanks! They may have let their domain name registration expire -- or could be having problems with their host (more likely the former than the latter)... Something like that happened once before when I was a more active member... Hopefully they'll get everything back up and running quick! Thanks! They may have let their domain name registration expire — or could be having problems with their host (more likely the former than the latter)… Something like that happened once before when I was a more active member… Hopefully they’ll get everything back up and running quick!

]]>